User Tools

Site Tools


You are not allowed to perform this action
zeiss_lsm_510_meta_repair

Zeiss LSM 510 META Repair History

  • 17/06/15 - DPSS 561 nm laser is not working

2014

  • 27/05/14 - A new Argon laser has been installed
  • 16/05/14 - The Argon laser is not working

2013

  • 29/07/13 - A new Controller for the 405 nm laser has been installed
  • 29/07/13 - A new emission filter wheel holder for channel 2 has been installed

2012

  • 05/07/12 - A new fiber manipulator for the 405 nm laser has been installed

2011

  • 22/12/11 - A new 405 nm laser has been installed
  • 17/11/11 - New 405 and 594 nm lasers have been installed on Zeiss LSM 510 META!
  • 31/05/11 - Incubator heater on Zeiss LSM 510 META is working again!

2010

  • 23/12/10 - The 405 nm laser has been re-aligned
  • 09/11/10 - Incubator heater on Zeiss LSM 510 META is not working
  • 20/08/10 - The safety sensor on transmitted light arm has been replaced
  • 05/04/10 - A new 405 nm laser was installed on the Zeiss LSM 510 META
  • 15/01/10 - Diode 405 nm laser on the Zeiss LSM 510 META is working again!
  • 12/01/10 - Diode 405 nm laser on the Zeiss LSM 510 META is not working

2009

  • 30/11/09 - The Scanner X has been replaced (under warranty)
  • 19/03/09 - The Scanner X has been replaced
  • 11/02/09 - A new Argon laser has been installed

Click here to get info on the Zeiss LSM 510 META

zeiss_lsm_510_meta_repair.txt ยท Last modified: 2016/04/17 02:03 by bioimaging