Zeiss LSM 510 META Repair History
- 17/06/15 - DPSS 561 nm laser is not working
2014
- 27/05/14 - A new Argon laser has been installed
- 16/05/14 - The Argon laser is not working
2013
- 29/07/13 - A new Controller for the 405 nm laser has been installed
- 29/07/13 - A new emission filter wheel holder for channel 2 has been installed
2012
- 05/07/12 - A new fiber manipulator for the 405 nm laser has been installed
2011
- 22/12/11 - A new 405 nm laser has been installed
- 17/11/11 - New 405 and 594 nm lasers have been installed on Zeiss LSM 510 META!
- 31/05/11 - Incubator heater on Zeiss LSM 510 META is working again!
2010
- 23/12/10 - The 405 nm laser has been re-aligned
- 09/11/10 - Incubator heater on Zeiss LSM 510 META is not working
- 20/08/10 - The safety sensor on transmitted light arm has been replaced
- 05/04/10 - A new 405 nm laser was installed on the Zeiss LSM 510 META
- 15/01/10 - Diode 405 nm laser on the Zeiss LSM 510 META is working again!
- 12/01/10 - Diode 405 nm laser on the Zeiss LSM 510 META is not working
2009
- 30/11/09 - The Scanner X has been replaced (under warranty)
- 19/03/09 - The Scanner X has been replaced
- 11/02/09 - A new Argon laser has been installed
