====== Zeiss LSM 510 META Repair History ====== * **17/06/15** - **DPSS 561 nm laser** is not working ===2014=== * **27/05/14** - A new **Argon laser** has been installed * **16/05/14** - The **Argon laser** is not working ===2013=== * **29/07/13** - A new **Controller for the 405 nm laser** has been installed * **29/07/13** - A new **emission filter wheel holder for channel 2** has been installed ===2012=== * **05/07/12** - A new **fiber manipulator for the 405 nm laser** has been installed ===2011=== * **22/12/11** - A new **405 nm laser** has been installed * **17/11/11** - New **405 and 594 nm lasers** have been installed on [[zeiss_lsm_510_meta|Zeiss LSM 510 META]]! * **31/05/11** - Incubator heater on [[zeiss_lsm_510_meta|Zeiss LSM 510 META]] is **working again**! ===2010=== * **23/12/10** - The **405 nm laser** has been re-aligned * **09/11/10** - Incubator heater on [[zeiss_lsm_510_meta|Zeiss LSM 510 META]] is **not working** * **20/08/10** - The **safety sensor** on transmitted light arm has been replaced * **05/04/10** - A new **405 nm laser** was installed on the [[zeiss_lsm_510_meta|Zeiss LSM 510 META]] * **15/01/10** - Diode **405 nm laser** on the [[zeiss_lsm_510_meta|Zeiss LSM 510 META]] is **working again**! * **12/01/10** - Diode **405 nm laser** on the [[zeiss_lsm_510_meta|Zeiss LSM 510 META]] is **not working** ===2009=== * **30/11/09** - The **Scanner X** has been replaced (under warranty) * **19/03/09** - The **Scanner X** has been replaced * **11/02/09** - A new **Argon laser** has been installed ---- {{book.png|}}[[zeiss_lsm_510_meta|Click here to get info on the Zeiss LSM 510 META]]